Is it possible to connect the engine from a bobbin tape recorder directly to a 220V network? How to do it right?
Hello! Is it possible to connect the sauna heater Narvi Stonet 6.0 kW to 220V instead of 380V. The manufacturer did not foresee this. How to do it right?
After installing the wiring, it turned out that the wiring in two rooms did not work, the multimeter was 220V, but even the bulbs did not light. What to do?
Overview of the vertical vacuum cleaner HOOVER H-FREE model HF18DPT 019. Description of the characteristics and functions. Pros and cons of the new HOOVER HF18DPT 019 vacuum cleaner.
We bought a three-phase meter, but at Mosenergo they said that it would not be suitable for amperes, what should be the parameters on the meter?
5-arm chandelier, the output of the switch under the ceiling - at the junction of the wall and the ceiling, is switched on with a rope. How can walls install a push button switch below?
I live in a private house, 380V are brought to the shield on the support, and 220 to the house, do I need to coordinate with the energy distribution to connect 380V from this shield?
How to assemble a three-phase shield in order to put one phase into the house, bathhouse and garage?
Hello! Help to assemble a three-phase electrical panel according to this scheme: distribute the house, bath and garage in 1 phase. How to do it right?
Is it possible to set the timer so that the electricity turns on and off cyclically around the clock. For example, 20 minutes is connected and 10 minutes is turned off.
When replacing lighting at work with DRL lamps, they refused to install a fan near the lamp. What may be the distance restrictions?
We are building a private house. SIP with an introductory shield is suitable for the house. Is it necessary to ground the zero at the input separately or can it be grounded through the ground loop in the house?
Is it possible to connect a 220 / 12V power supply and use it constantly, that is, without shutdowns? Will this fire come about?
It is necessary to replace the cable from the pole to the meter. The allocated power is 11 kW. What section should the SIP wire be in order to withstand such a load?
Tell me which document normalizes the distance from the foundation of the house to the grounding device? Does the distance really have to be about 1 meter?
Insulated neutral networks are used to increase the reliability of high voltage lines and in hazardous electrical installations. What is isolated neutral, read the article.
I installed LEDs in the car door, but they burn out in 2-3 months. What to do? Maybe install 24V LEDs?
Hello! RCD start to work, do I need to replace it? It is advised to install an automatic machine instead. And how to find a leak?
Hello! If you replace the outlet for the hob from 16A to 32A, can there be any bad consequences? Is it safe?
Hello! Electricity consumption has doubled in the last 3 months. We can’t determine the reason - the old wiring or the counter, tell me what to do?
When repairing an apartment, the builders decided to connect the electric stove cable to two outlets, and to it an electric stove with a capacity of 7.2 kW and an oven 3.5 kW, can it withstand it?
Hello! Help me choose an RCD for electrical panels, into groups of 4 automatic machines, with a long line up to 50 meters. New wiring, how to calculate the leakage current?
Please tell me, is it possible to power two electrical panels from a junction box, or is it better to take power from the input machine? How to do it right?
Good afternoon, tell me which tool for electrical installation will be needed in the initial stages of work? What do you need to repair wiring and household appliances?
I deal with the landscape and I need to do the illumination of perforated metal (round chimney shafts from the underground floor). What fixtures to choose for this?