What tool will be needed for electrical installation in the initial stages?

Hello! Pliers, electrical tape and a screwdriver. This is if at all at the initial. And if without jokes, it very much depends on what sphere you work in. For household tasks enough:

1. Screwdriver with a set of bits (cross, slot).
2. Powerful screwdriver with a short handle.
3. Two thin screwdrivers with a long sting under the cross and under the slot.
4. Two pairs of pliers, preferably one larger and others smaller.
5. Side cutters (desirable, but not necessary).
6. Multimeter.
7. Indicator screwdriver with neon lamp.
8. Bipolar indicator with dialing function.
9. Sharp blade knife.
10. Stripper (a tool for removing insulation from wires), for the required cable cross-sections (at least so that 4 sq. Mm could be stripped, an extreme case - 2.5 sq. Mm).
11. Crimper (crimping) for sleeves and tips of the desired cross-sections (preferably up to 6 sq. Mm, and preferably several to different cross-section ranges).
12. Soldering iron, and preferably a welding machine for welding twists.
13. A set of wrenches from 6 to 21 numbers, preferably 2 each, but larger and smaller sizes may be needed.

All of the above can go up to 3-5 thousand, if you take not branded.
This is from what I remembered with a hand tool. From a power tool you need at least a screwdriver or a drill, if you will make holes in the walls, then an impact drill and a puncher are also needed. This question is also considered in the article: https://my.electricianexp.com/en/kakie-instrumenty-dolzhny-byt-u-domashnego-elektrika.html