How to connect the chandelier to the two-key switch Aqara?

Denis asks:

Good afternoon! Because in electrics, I’m zero, not phase 🙂 I want to ask: there is a two-key off Aqara (L, L1 and L2), there are two chandeliers in different rooms. Can they be connected to such a switch so that each button has its own chandelier? (I ask you not to anathema for the following question: twist the 2 wires of the phase and put them in L, this is not normal, right?).

The answer to the question:

Good afternoon. In L, the phase from the switchboards is connected, and from L1 and L2 the phases go to the lamps. Why bring two phases? What you drew is not entirely correct. Zeros connect to zero, earth to earth, and phases to L1 and L2 as I wrote above.

If the wiring is divided into groups, i.e. both of these rooms are on different automatic machines - it’s already impossible to connect, you need to set either two single-key switches or look for a two-key so that there are 4 terminals, i.e. each key has its own terminal for the incoming phase.

You can read more in the article on connecting a two-key switch:https://my.electricianexp.com/en/elektricheskaya-sxema-podklyucheniya-dvuxklavishnogo-vyklyuchatelya.html

Ask your question Answer the question