Can the hob and oven be connected to the terminal box? So that the power cable is connected on the one hand, and the cables of two devices on the other?
I put the generator, often turn off the light. It is necessary to turn off the electric boiler when the total voltage is cut, but for the well and the circulation pump to work.
How to connect a cross over switch in a single-phase and three-phase network. Connection diagram of the ABB switch. Recommendations for installing a cross over switch.
How to connect a two-tariff meter in a single-phase and three-phase network. The procedure for switching to multi-tariff electricity metering.
An electrician today connected a new plate and the cable to the outlet is almost stretched, and on weight. Is it dangerous? What to do in such a situation?
In the ceiling are two two-wire wires, a double switch. How to connect a chandelier to a double switch so that 3 and 2 bulbs can be turned on separately?
Chandelier 4 shades. Double switch for 2 and 4 shades. One lamp does not work. The second ceiling bursts if you screw the cap. How to determine the problem?
If my neighbors have a defective water heater or the wiring in the bathroom is faulty, and the current gets into the water when I lie in the bathroom. What will happen to me?
The smart set-top box works from the 220 network, with a power supply, 12 volt 1.5 amperes are written on the set-top box itself. Can I connect it to a car battery?
There are 4 outputs at the driver input, red, green, brown, blue. On the driver itself, 3 designations (V) DC16-24v (I) DC300mA (P) 18W. So where to solder?
Is it possible to connect the outlet from the outlet that goes to the electric stove? Is it safe? I do not see other options to lengthen, because breaking drywall is not an option.