Why does the machine knock out when connected to the flashlights?

Hello. The problem is this. Through 4 single-pole machines, current flows to 4 lamps (each power is 1 kW), and the zero wires all go to one wire. Once one of the machine guns was knocked out (the lamp shone for a while and was chopped off), we removed it from the circuit with the machine gun, then we turned on the remaining 3 lamps and knocked out another one (It also shone a bit and chopped off. We took this lamp separately, it wire and machine and checked in a normal outlet and everything works. What could be?

Loading...

One comment

  • Admin

    If the lights are working and work when plugged into another outlet, it means a problem in the wiring from which they were powered. The wires were probably in unsatisfactory condition or their cross-section was incorrectly selected. Check the condition of the wiring that supplied these lights.

    To answer

Add a comment