Why did the lamps stop lighting in the chandelier, even new ones?
Good afternoon. Tell me please. We bought a chandelier a year ago, connected it, recently some lights in certain cartridges have started blinking (even if you put a new light). And today, only two with 5 watts of 5 watts of light are on. If I put a 12-watt bulb, the chandelier does not light at all.
Loading...
Hello! Remove the chandelier and check the wiring in it. Also check the condition and clean the contacts on the cartridges or replace them. Most likely it should help.
Good afternoon, we decided to change the usual light bulbs for LEDs; five out of seven are on. WHY?
Hello! Did you use the advice above?
Hello, I bought a chandelier with G4 xenon bulbs, I wanted to replace it with LED, I bought LED bulbs, but not one is on. With what it can be connected?
Hello, I think that the lamps are 12V (for this base, usually 12V), and the old halogens were powered by an electronic transformer. It gives out alternating current at the exit, but high-frequency, for LEDs the constant is necessary.
Try to buy a power supply for 12V DC, with a power of 20-50% more than the power of the bulbs (all in total) and connect it to this chandelier ... Such PSUs are also called "power supply (or driver) for an LED strip) For this, you need to remove it and replace the native power source with the one you bought.