Major Nivona coffee machine breakdowns and repair tips

Nivona coffee machines and coffee makers are quite popular in the market, as have an affordable price with high Swiss build quality. Like any other type of equipment, Nivon's devices are prone to failure. Most often this is due to improper care and maintenance. Next, we will look at the most common Nivona coffee machine malfunctions and breakdown repair tips when you can do it yourself.

If the coffee maker doesn’t grind coffee, then the first thing to do is to check for the presence of grains. Isn't that the point? Disassemble and clean the knives from adhering coffee or the formation of rust (during prolonged use). If this did not help to fix the malfunction, it is most likely a matter of the engine. Here it is already impossible to repair the damage yourself, you need to contact the service center for help.

Millstone cleaning

Another typical malfunction of Nivona coffee machines is that coffee does not flow from the dispenser. The reasons for this are: blockage of the fuser channels, scale formation in these channels or failure of the pressure pump. For repairs, you first need to clean the channels from possible blockages and scale. If the problem is not solved, you should check the discharge pump, it may be out of order.

Coffee machine clogging

Is water flowing from a Nivona coffee machine? This also often happens due to damage to the seal of the metering unit or the water tank. Also, the cause of the leak may be loose fastening of the connecting tubes. The device can be repaired by replacing damaged gaskets and gaskets, as well as checking the quality of the tubes.

Water leak

If the coffee maker does not turn on after power surges, it is highly likely that the electronic board is out of order. Here, repairs are rarely advisable, you have to buy a new one. However, to prevent this from happening again, we recommend installing a voltage stabilizer to protect electrical appliances.

Electronic board

There are times when the Nivon coffee machine is noisy at work. The sound is made by the injection pump due to the fact that the water tank is empty or the pipe is simply squeezed through which the water is supplied. To make repairs in this case is not so difficult, it is enough to eliminate the pinch point. Sometimes you also have to replace the tank.

Pressure pump photo

If coffee is drained into the tray, and not through special nozzles, as this should happen, then the drain valve is faulty. You can try to clean it, but most often you have to replace the drain valve for repairs.

Finally, we recommend watching a useful video on the topic:

(2 votes)
Loading...

One comment

  • Alexei

    There was a problem with the Nivona 626:
    from time to time, but it seems more and more often the machine is pouring coffee, but then it does not deliver water and throws dry ground coffee into the trash.
    Next time, it may work or maybe not until it is turned off.
    Sometimes auto-flushing also does not work - it does not supply water.
    Usually there are no errors, it returns to standby mode.
    But a couple of times I saw an error - 3 grains blink and 3 strips from below blink.

    To answer

Add a comment