Incorrect meter connection

Good afternoon! Faced such a problem! There was a question about moving the meter to the facade of the house, an electrician arrived, like he did everything. But today the employees of the RES came and said that the connection was wrong! It is necessary to redo it, otherwise the meter did not seal. The electrician who was doing this left already on New Year's weekend)) I ask for advice on what was done wrong here? Many thanks to all who answered!

Electricity meter connection

Loading...

5 comments

  • Admin

    Hello! Did you get a connection diagram in TU? Why didn’t you ask yourself what exactly is wrong? Based on the photo, I see no problems in the connection. The machine costs up to the counter - this is recommended in GOST 17703-72 and PUE 1.5.36, everything is correct. Zero directly, you can’t tear it (if it is PEN), also right. The machine after the counter is also all right.

    To answer
    • Maxim

      They said the sip was wrong, they didn’t like zero (but I don’t know what to say to the electrician new ... Res does not deal with connection, only sealing

      To answer
      • Admin

        Incorrectly failed? So maybe the problem is in the air, and not in the shield? I do not understand the problem if the switching devices were in it - of course. Specify.

        To answer
      • Sergey

        The connection diagram is correct, you just need to connect the sip to a double input automatic machine and the problem will disappear, they were confused by the zero wire connected directly to the counter!

        To answer
  • Alexei

    Hello hello, please tell me, I changed all the wiring, and now all the switches in the house turn on the light in the other direction, which is dangerous, and the ground is not connected yet. Thank you in advance.

    To answer

Add a comment