Step-by-step instructions on how to conduct electrical wiring in the apartment with your own hands. Requirements for electrical installation in the apartment, circuit board diagram, video review of all works.
Installation of electrical wiring
Do you want to make wiring in a private house? The article provides instructions for installing electrical wiring in the house with your own hands, as well as a video example of wiring.
Differences in laying wiring on the floor or ceiling in apartments and houses. Which is better and how to lay wiring cheaper. Pros and cons of different options.
What is the best way to lay wiring in corrugation or without? What does the PUE say about this, which solution is better, cheaper and safer? How to wiring without corrugation.
How a modern electrical panel for an apartment or a private house should be arranged. What to install inside the electrical panel to protect the wiring and the person.
The main methods of protecting cables and wires from exposure to ultraviolet radiation, as well as methods for restoring insulation. What is said in the PUE.
When connecting household buildings, the question arises of how to lay the cable. Consider the pros and cons of laying a cable through the air and in the ground and how best to lay.
What are the metal trays EKF, how they are arranged. Overview of perforated, non-perforated, wire and stairways from EKF.
Cable laying in cable ducts is carried out by a team of specialists using a specific technology. The laying standards are described in the PUE and a number of other standards.
How to install a metering board on a support according to the PUE. What are the requirements for installation and how to properly ground the shield. Organizational matters.
List of the main types of electrical work in everyday life and in production.In what cases do electricians need an SRO approval and when can you do without it?
What do you do first when building a new house or renovating an old one? Electrics before plaster or vice versa - after? The article tells you how to do it right.
A step-by-step description of all the stages of laying the wiring in the country with your own hands. Wiring diagram from the shield. How to conduct internal and external wiring.
What are non-disconnect lines in the shield and why are they needed. A circuit of a non-disconnectable line in a switchboard with an RCD, a voltage relay, a starter and other devices.
What materials are needed for electrical work in an apartment and a house. List of minimum consumables and protective devices for electrical installation.
What is adhesive tape, what is its principle of operation and how to use this type of connector for wires. Types and sizes of common adhesive blocks.
How to arrange the sockets in the children's room and how much will be optimal. Requirements for the design and installation height of outlets in the nursery.
Why should electrical wiring be replaced in Khrushchev? How to replace the wiring with your own hands and where to look for old wires. Typical wiring diagram.
How and where to put outlets in the bedroom to connect appliances. The height of the sockets from the floor. Proper placement of electrical fittings in all areas.
How and where is it better to place the sockets in the bathroom for connecting household appliances. PUE requirements for the installation of outlets in the bathroom.
How to arrange outlets in the kitchen to connect household appliances. Layout of kitchen outlets and installation height from the floor. Types of outlets for the kitchen.
What should be modern wiring in an apartment and a private house. New ways to protect wiring, as well as devices that are ways to increase comfort.
Tips on how to choose a cable channel for wiring by type of design and cable cross-section. Cable channel filling table. The main mistake in choosing.
How to lay the cable under the road. PUE requirements and other standards that must be considered when installing a cable line under the road.
How to make the connection of multicore wires with each other and with single-core. Rules for connecting a stranded wire to a machine, outlet, meter.
How is a partial replacement of wiring in an apartment and a private house. Is it possible to change the wiring in parts and what nuances should be taken into account.